2 replies to this topic

[Prop Gun Guy]

Doing an upgrade with some ABS, zinc alloy and CNC aluminum and have a sticky gun? I just about quit until I found "Gun Butter" lubricant and grease. It will out perform all lubricants on the market for Airsoft or Real Steel. If you have a real Glock, Springfield XD or a Sig Mosquito it's designed for not only alloy but a combination of Polymer and metal of all types. It will make the worst Airsoft upgrade slip & slide perfect. Use the lubricant on everything except the GBB magazine and the BB chamber. Lube the inner barrel with this stuff especially if your shooting a tight bore. Add FPS no problem. Use the Gun Butter grease on the AEG gearbox and the lube on the hopup and all axis points. It also repels grit & dirt and not trap it. You will be glad you did. Just type in "Gun Butter" on-line and send Mark an email. Tell him Judy sent you. Checkout his Gun Butter Facebook page. The SEALS are using it, why not you? It will lube lots of other stuff too. Try Some.
 Gun Butter.jpg   61.78K   23 downloads

[aerosmith]

Petroleum based?

Edited by aerosmith, 09 May 2011 - 10:29 PM.

[Piano Black]

While some might say this is a bit heavy handed of me, I've decided to lock this topic as it reads like an informercial for a ShamWow.

4. There shall be no rank posts, advertising, or spam and content should be readable.
Posts should always have some quality in them. Rank posting and spam are defined as any post that does not contribute to the conversation. Blatant advertising is not allowed. Please attempt to use decent spelling and grammar as this is not a MMORPG. Also, goodbye threads are not allowed. If you wish to leave, the please do so quietly.

-Piano